The Aluminum Custom Bridge creates a clean articulate tone and sustain across all 6 strings. Excellent for Country/Country Rock. These bridges will install on Gretsch, Gibson, Guild, Fender and most other guitars with posts spacing of 2.9 (73.66mm) or 3.0 (76.66mm).
The Aluminum bridge is also available to match your fret board radius of 9.5" or 12” radius. We can also match your radius if it is not a 9.5" or 12”. Email prior to ordering.
All standard bridge post holes are drilled with a diameter of .160” (4.06mm, 5/32") and have a 4mm angle milled across the top of the bridge to help improve intonation. If your guitar has post holes that require a diameter of 6mm you must specify this on the order form.
Bridges are hand slotted to your string spacing and buffed to a mirror shine.
How To Find Center of Bridge Post Stud Spacing
Download Printable Radius Gauge for 9.5 inch and 12 inch radius guitar fretboards.
Any bridge with a Tone Chamber will have a bit more highs in the tone and have better string separation clarity within chords.
The Brass Custom Bridge gives a more Jazzy Blues tone with good sustain. These bridges will install on Gretsch, Gibson, Guild, Fender and most other guitars with posts spacing of 2.9 (73.66mm) or 3.0 (76.66mm).
The Brass bridge is also available to match your fret board radius of 9.5" or 12” radius. We can also match your radius if it is not a 9.5" or 12”. Email prior to ordering.
All standard bridge post holes are drilled with a diameter of .160” (4.06mm, 5/32") and have a 4mm angle milled across the top of the bridge to help improve intonation. If your guitar has post holes that require a diameter of 6mm you must specify this on the order form.
Bridges are hand slotted to your string spacing and buffed to a mirror shine.
How To Find Center of Bridge Post Stud Spacing
Download Printable Radius Gauge for 9.5 inch and 12 inch radius guitar fretboards.
Any bridge with a Tone Chamber will have a bit more highs in the tone and have better string separation clarity within chords.
The Stainless Steel Bridge gives a good clean tone and sustain for Rock and Rockabilly. These bridges will install on Gretsch, Gibson, Guild, Fender and most other guitars with posts spacing of 2.9 (73.66mm) or 3.0 (76.66mm).
The Stainless Steel bridge is also available to match your fret board radius of 9.5" or 12” radius. We can also match your radius if it is not a 9.5" or 12”. Email prior to ordering.
All standard bridge post holes are drilled with a diameter of .160” (4.06mm, 5/32") and have a 4mm angle milled across the top of the bridge to help improve intonation. If your guitar has post holes that require a diameter of 6mm you must specify this on the order form.
Bridges are hand slotted to your string spacing. Stainless will have a highly polished top and ends. The front and back sides of both are going to be a 400 grit brushed finish.
How To Find Center of Bridge Post Stud Spacing
Download Printable Radius Gauge for 9.5 inch and 12 inch radius guitar fretboards.
Any bridge with a Tone Chamber will have a bit more highs in the tone and have better string separation clarity within chords.
The Titanium Custom Bridge has its own unique sound that is hard to put into words. It has been described on Gretsch-talk.com as: "The clarity and complexity of the sound are incredible. These bridges will install on Gretsch, Gibson, Guild, Fender and most other guitars with posts spacing of 2.9 (73.66mm).
Special Note - This bridge is only available with a Tone Chamber.
The Titanium bridge is also available to match your fret board radius of 9.5" or 12” radius. We can also match your radius if it is not a 9.5" or 12”. Email prior to ordering.
Due to cost vs. demand, Titanium Bridges are special ordered and must be Pre-Paid and are non-refundable.
Before placing an order:
1. Be sure of your measurements.
2. We must have a minimum of 10 pre orders before having them manufactured.
3. Titanium Bridges are non-refundable.
NOTE: If you are interested in a Titanium bridge you will need to contact me to be added to a pre-order list. Once I have a minimum of 10 requests I will email everyone and send out an invoice for Pre-payment. Order for blanks will then be made which will take up to 4 weeks before I will receive them for slotting and finishing.
All standard bridge post holes are drilled with a diameter of .160” (4.06mm, 5/32") and have a 4mm angle milled across the top of the bridge to help improve intonation. If your guitar has post holes that require a diameter of 6mm you must specify this on the order form.
Bridges are hand slotted to your string spacing and will have a highly polished top and ends. The front and back sides of both are going to be a 400 grit brushed finish.
How To Find Center of Bridge Post Stud Spacing
Download Printable Radius Gauge for 9.5 inch and 12 inch radius guitar fretboards.
Any bridge with a Tone Chamber will have a bit more highs in the tone and have better string separation clarity within chords.
The Special Custom Bridge gives a more jazzy blues tone with good sustain. These bridges will install on Gretsch, Gibson, Guild, Fender and most other guitars with posts spacing of 2.9 (73.66mm) or 3.0 (76.66mm).
Special Note - A Special Bridge is only available in aluminum or brass.
The Special bridge is also available to match your fret board radius of 9.5" or 12” radius. We can also match your radius if it is not a 9.5" or 12”. Email prior to ordering.
All standard bridge post holes are drilled with a diameter of .160” (4.06mm, 5/32") and have a 4mm angle milled across the top of the bridge to help improve intonation. If your guitar has post holes that require a diameter of 6mm you must specify this on the order form.
Bridges are hand slotted to your string spacing and buffed to a mirror shine.
How To Find Center of Bridge Post Stud Spacing
Download Printable Radius Gauge for 9.5 inch and 12 inch radius guitar fretboards.
A tone chamber is not available in a Special Bridge. Any bridge with a Tone Chamber will have a bit more highs in the tone and have better string separation clarity within chords.
Darren Riley offers compatible 2.9 Gretch bridge base's.
Darren Riley is very professional and friendly shop to work with. I receive many emails asking where to buy bridge bases or what bridge bases are compatible with my bridges and I send them to Darren because of their friendly service and great product.
I have communicated with Darren Riley and I have received permission to promote and utilize there site products, images, and descriptions.
Make sure to tell Darren where you found his products! Thanks!
Darren Riley WebsiteTo find center of bridge base studs, measure from inside of one stud to the outside of the other stud.
Curtis Kent explains and demonstrates how the Compton Bridge improved the performance of his guitar.
Order your bridge